RADIATOR DRAIN KIT 944 / 951 / 968 If you have ever tried to drain the radiator on a 944 or 968, especially the 944 Turbo & 944S2, you know what a complete mess it can be. You carefully loosen the drain screw, and the sticky coolant goes everywhere but where you thought it would. It can run down the lower radiator support pan and run out the other side of the car at the same time. It can squirt out and spray and bounce off anything and everything near by. It usually requires a major clean up afterwards and makes it one of those dreaded jobs, as simple as it may be.  This smart little Radiator Drain Kit replaces the factory blue plastic drain plug with a Custom Fitting then attaches to a hose that utilizes a remote shut-off valve. Now you can direct the draining coolant to the place of "your" choice, and not where "it" chooses to go. The custom made fitting (blue)is tapped 1/8" NPT so you can either attach one of the hose barbs or the ball valve first and arrange the set-up in more then one way.  So that next time you need to drain the coolant, you can do it MESS FREE! The prefect time to install this Radiator Drain Kit is anytime your draining your coolant system down. Whether changing radiator hoses, the radiator or cylinder head gasket. It will make the next time a much more pleasant experience. Track and Street cars both can benefit from this and your mechanic will thank you! Radiator Drain Kit fit the following models:
|
Secure Checkout
